Search results

I'd say it was 8mm diameter and 10 mm in height. There isnt anything under the heat shrink. I'll have a look to order overteh weekend. Thanks for your help.

Thanks, Ive checked and the only writing is 102. Is it worth me checking underneath the skin? Its not easy to get hold of components on the high street any more so would appreciate any advice what component to get before I order online. I also noticed the corrosion so will clean it up if I...

Thanks for the advice, I might give it a go. I know its a 1000uF capacitor but how do I know what voltage rating?

My Wiser HubR developed a fault of constantly resetting /rebooing every 10 minutes. Been onto tech support for some weeks without any progress apart from normal basic questions. I sent videos, they apparently logged into it and couldnt see any problems. After lots of fault finding I found that...

Just an update for others that may come across this thread, all wired in as follows and work perfectly :- T40 ---------- Relay Terminal 1 ----- A (this is connected to Programmer CH ON terminal) Terminal 2 ----- N (probably connected to Programmer N terminal) Terminal 3 ----- B (this...

thanks stem, maybe I should have known to be clearer working in TAC support, i get this all te time people leaving out important info!! Anyway further info, I have checked voltage on Live when timer is off on CH and I have 40V, is this normal? Does this mean I do not need to put in a an extra...

Hi D_Hailsham, I think you have just confirmed to me what I said above about runnning a new cable. Hopefully this should do what I want to do which is exactly what you have stated about keeping the timer. Thanks for your feedback. If I can get another cable to the thermostat reciever...

D_hailsham :- it is just a thermostat so not programmable.

If I can get another cable to the thermostat reciever can I do this so that it is still controlled by the timer :- N = Netral L = Perm Live (new cable to patch panel) A = Timer Live B = Switched Live Thanks

If I can get another cable to the thermostat reciever can I do this so that it is also still controlled by the timer :- N = Netral L = Perm Live (new cable to patch panel) A = Timer Live B = Switched Live Thanks

Thanks fo your post stem, can you suggest what I do need without a major rewire which is why I want it wireless??

ok, maybe I have bought the wrong thing, ebay calling!! Can anyone suggest what I need?

Hi, I am even more confused now. I have a 7 day timer in the airing cupboard controlling hot water and radiators individually,its the room stat at the bottom of the stairs I am replacing so it is just controlling room temperature wherever I put the wireless control. The reason I was unsure...

Hi, I am even more confused now. I have a 7 day timer in the airing cupboard controlling hot water and radiators individually,its the room stat at the bottom of the stairs I am replacing so it is just controlling room temperature wherever I put the wireless control. The reason I was unsure...

Thanks , I just wanted to be 100% sure as it has been a long time since I looked at cct diagrams. I think Live is terminal A and switched B on the new stat Thanks

Hi, I am replacing a honeywell room stat T40 (T6360B) for a honeywell Wireless Room Stat R6660D. My question is I have four wires :- 1 = red (Live) 2 = Blue (neutral) 3 = Yellow (Switched Live) Earth = Earth. I dont think the new stat needs an earth or Neutral, can you confirm on...

Hi, I am replacing a honeywell room stat T40 (T6360B) for a honeywell Wireless Room Stat R6660D. My question is I have four wires :- 1 = red (Live) 2 = Blue (neutral) 3 = Yellow (Switched Live) Earth = Earth. I dont think the new stat needs an earth or Neutral, can you confirm on which...