Search results

Hi there, I was wondering if anyone can help. I have just moved in to a rented flat, and the hot water stopped working on Saturday. We have reported to the landlord, but hoping with there being 2 x immersion heaters I can program something temporary. I have a pulsacoil III with 2 immersion...

Hi There, Just finished installing a Texecom Premier 24 Poly with 2 Premier RKP's. Bit of an odd fault- but both RKP back-lights appear to flicker. One RKP is less then one meter away, and the other about 10m away. This fault occurs when both on mains and battery or when just on battery. Any...

not really an update as such, but I took the advice and replaced the crappy wicks PIR's for a couple of Bosch BlueLines in EOL and it appears to have done the trick! Thanks for all the ideas :-)

No other ideas :-( ?

So no obvious ideas then..... Perhaps tomorrow I'll try a working PIR from one of the working 2 to rule out the wiring, and if it works purchase 4 new sensors. I'll report back if I manage to solve it! Cheers Jake

Sorry- point I was trying to make is the resistors are giving the correct values individually and combined at the PIR. At the panel I am getting 5k4 closed and 6k6 active! The panel was a rubbish Melcom ST6100, which appeared to be from Maplin. The PIR's from a quick Google search appear to...

Hi sparkymarka , Yup, even checked the resistance values of the individual resistors and across the terminals on the PIR circuit. Get approx 4k6 across the + and - alarm terminals, approx 2k16 from alarm - and tamper +, and 7k6ish across alarm + and tamper +, which i expect..Go figure....

Hi All, Am having a little trouble having just finished an upgrade from an old failed alarm system to a newer premier 24 poly system. I am using 7 out of the 8 zones (have configure Z8 to not in use), and have wired all zones using 2k2 and 4k7 EOL configured to the DoublePole/EOL option on...