Search results

Its fairly new, couple of years old, had hot and cold fine till it suddenly stopped. yes you select by side to side, I didnt install it but there are isolation valves on the separate supply pipes behind the basin.

No its a mixer - monobloc waterfall with cartridge. so when I took top off and took out cartridge out, then turn supply pipe on, (one at a time) I could tell issue was the supply of water not the tap. I was thinking I could just disconnect the two supply pipes from the tap and connect them...

Thanks Andy, interesting idea, do you mean attach one end to the bath tap and one end to the basin tap? they are waterfall taps so couldn't do that.... but could connect the cold water supply pipe to the basin to the hot water tap supply pipe with a hose and turn on the valve, will that have...

Thanks guys, I had considered debris but was hoping not...the pipes go into the Garage ceiling and into a enclosed crawl wall space that is tiled over in the bathroom where I am assuming there is a junction splitting the flow to bath, shower and basin. The basin pipe goes under the tiled floor...

Thanks Andy, will see if I can get a pic TBH I have stripped the supply pipe to the basin back to leave just 6 inches of plastic pipe sticking out of the floor and there was no water flowing from the pipe anymore. Agree it must supply the bath and shower too which is why its baffling me a bit...

Thanks Andy but its not the tap, I dismantled the tap only to find when I turned the inline isolation valve on with the cartridge removed, there was no water coming from the hot supply pipe (cold was fine). I worked down the hot supply pipe under the basin, removed the isolation valve in case...

I have a pressured heating/hot water system with a OSO unvented water heater in the garage and a glow worm ultracom Cxi. Everythings been workng fine then one day the hot tap in the upstairs basin stopped working at all, not even a trickle. Assumed it was the tap but have checked the...