Search results

Thanks again Armo74! I took the tap head out to have a look tonight and it appears that it was just jammed. All the washers looked in good nick. I split the head in two and put it back together and now it all works fine! - The plumbing equivalent of turning it off and on again. The mixer taps...

I live in West Wales, and an old house isn't a house round here unless it's got either fruity plumbing or electrics! :D. I would have preferred if they had taken everything out, as the toilet cistern leaks a tiny amount into the bowl so the tank is gurgling nearly 24/7, but that's a problem for...

Hi CBF, No idea. They took the old immersion heater out, but the cold tank is still up there gurgling away, seemingly only supplying the upstairs toilet and bath. The combi installation was a grant job so I suppose they do the bare minimum to get the system going. If they didn't need to take the...

Just had another look at the problem and it definately looks like a problem with the tap. Hot tap will turn loads of times whilst the cold will barely do 360 degrees. Will take of the head and have looks. Thanks again.

Thanks for that. I have a combi boiler installed, so all hot water comes from there, and the upstairs cold water in the bathroom basin is mains. Your tap theory would explain the gradual decline in water over the last couple of weeks. I should have probably explained that it is a mixer tap with...

Hi, I have a Zanussi condenser dryer that seems to be condensing onto my tiled kitchen floor. This is a relatively new occurrence as we've had the dryer for nearly four years in this position. A few months ago I replaced a sealing ring on the connector to the reservoir and it seems to have...

Hi, Hope someone can help. After a few weeks of intermittent running - sometimes a trickle, sometimes an OK amount - the cold tap in my bath has stopped completely. I believe it is fed from the tank in the loft because the bathroom toilet is also fed from there and in looking for a solution...