Search results

Do you require building control approval?

Do they also obscure sightlines for the junction?

How did you calc the 45deg? Do you have the measurements for (i) the full width of the double doors, and (ii) the distance from double doors to the boundary so that you can re-calc/check the 45deg.

This seems tight. What head height to you hope to achieve at the apex when you have added floor joists, and roof insulation? And how usable will the space be if this is just at the apex?

How much head height do you / will you have?

I was pretty happy with that! Mine was also SGN.

Better to move it; not usually that expensive. You may be able to get a quote online from gas co. I got a quote from my gas network online and got it moved a few metres for c£400.

This is very common with standalone hood, and is barely noticeable; less so with integrated See here.

NB You may be OK with PD despite your bay; particularly because the angle of the walls appear to be more rearward than sidewards (can you measure the angle?). I had an application for CoL for PD approved that included the following: Page 23 of the Government’s Technical Guidance states “A wall...

Can you encompass -or- extend off an existing side extension. Or do you have to demolish; then build.

Isn’t it 4m allowed for a single storey PD extension?

How about internet radio?

You could try checking on the council’s planning/building control website.

Upstands for sure.

FYI. We had a central bay window in our house; and managed to get an LDC. This was the text we used to accompany the application: There is a bay window on the rear elevation serving the kitchen area. It is 2.4 metres wide and just 50cm in depth. This feature is part of the original...

FYI I put in a non-material amendment to remove a dormer from approved plans that I had not commenced and they rejected it. "I have examined the information submitted and have to advise that the proposed change, relating to the removal of the dormer window, is not acceptable and cannot be...

Can you still call it a bedroom if it has no windows?

I have checked the CU. It is on the same MCB as half the downstairs lights. I figured they may be separate circuits, but with one MCB? That TLC switch would work, but is a bit on the ugly side to have in the hall.

My question was really more about how easily the wiring would be than the features of the timer/sensor. - Is it likely that outside lighting like this would be on a dedicated loop, and therefore the timer/sensor could be wired in near/at the consumer unit? - Or might the outside lighting be...

I am trying to understand the feasibility of having a timer added for to my front exterior lighting. i.e. something like this: https://www.toolstation.com/7-day-electronic-lighting-timer-16a-8a/p28896? It is currently wired so that it is switched on with either the switch by the front door, or...