Search results

Hi again, I have done some research as Im still without a dishwasher and have had no replies to this thread! :cry: Apparently its the motor or capacitor. I have tested the capacitor and it appears to be discharging as it should. I have also rotated the motor and it is free?? PLease...

Hi All, Another problem with my dishwasher!! Now it is making a load gurgling noise and it does not appear to be spraying any water. It just gets very hot and loads of steam escapes when I open the door. Any ideas people?

Hi can anyone help me? Im wallpapering 1 wall up my stairs however running up the wall is an attached bannister. I started on the landing and thought I was doing OK I was putting the piece on above the bannister and a seperate piece below and worked my way down until i got to the bottom and...

Can anyone offer me any more help with this guys?

yes central heating is fine

Hi, My Nan has an Alpha 240E boiler which is not providing hot water? I have checked the LED's on the control panel and when you turn on a hot tap the hot water LED illuminates but the water does not get hot. PLease can someone give me some help on what I can check and what this fault could...

ok thanks, what do they look like?! Where will I find them?

Hi All, After some help with my dishwasher please. The RCD is tripping, on investigation the power is on and i can select a program but as soon as I close the door the RCD trips, I have read that it could be damp on the motor?? How can i cure this problem?

OK thanks for your help Guys much appreciated

Ok Thanks very much for your help. Is it a hard job to change diverter valve? Do I need to be Gas Safe?

Found it! Yeah can see the paddle which is coming down onto metal strip which makes switch adjusted it by pressure on strip and water does come on now. The has to be quite alot of flow though, is there anyway of adjusting the setting of the paddle??

The demand light does not come on. Yes heating works fine

Yeah thats the 1 I mean! so am I looking at the wrong thing?

When there is no water it is just sat there then eventually it kicks in lifts off the switch and the boiler ignites. Thanks for your help so far Ian! What are my next steps?

It definitely lifts off the switch??

No, I had a problem with the water being luke warm about 6 weeks ago and so changed the HW Plate and this cured the fault the old plate he was severly blocked! Now the boiler is not even asking for hot water, sometimes if I leave the tap on for a long period the 'piston' lifts breaking the...

It is a VUW GB 242/1 E Model

Hi All, I would appreciate some help with my Turbomax boiler. I can turn the hot water on full blast and the boiler is not clling for hot water? Is this a pressure switch issue? If so how can I check this?

thanks very much for your help muggles

thanks!! Can i clen it out myself or do i need a gas safe person? if so i need to replace the o-rings? can i buy thm seperate?