Search results

Is this right, and all earths to the earth terminal.

Oops typing mistake, have changed it, is this correct now :wink:

Ok think I got it, confusing myself here, so correct me if I'm wrong, First terminal - all browns from supply/next light/switch Second terminal - brown & white plus the blue switched live from switch Third terminal - all earths Fourth terminal - all blues from supply/next light

[/url] If the switch live is connected to first terminal in the block, then surely the white and brown wire that is going into the live block needs to be removed and put into the other side of the switched live, please look at first photo I posted, those wires in the block already come from the...

All off one switch

This was how I was going to wire it up, but as in my last photo those wires coming from the light have confused me

Thanks for that andyPKR, there is a metal tag that the block screws to, that I know, do you think you could send me a diagram on how this should be wired up please

Earth connection is between the L and N on the block

Hi all, I was looking at a wiring diagram for connecting this light up to the connection block, the problem I have is where do the live supply/next light supply/and switch go to, I'm confused by the four wires going into the block from the light, the live has a brown and white and the neutral...

What is it trades people, you ask them for a quote to do some work and arrange a time, wait in all day and they never turn up!, how annoying is that, can not even be bother to phone u up, had the same problem trying to get a roofer, what's up with people now a days

Yes ???? Explain cos everyone else says no?

I will not be a load of old crap, just borrowed from work :wink: , nothing like a bit of helpful free advice is there

Thanks, now that's what I don't want to happen, so what would be the best design, could you give me a list of all the require parts so I could order source the parts then get a electrician to fit them :wink:

Only asking

Not me doing the job, just would like to know that the job is done correctly, too many cowboys around these days

Sorry for that, so to put the 20amp rcbo in its own encloser next to the consumer unit, do u have a diagram how it's wired up please

Thanks, was thinking of using a MK Sentry IP65 6 way c/w 63 amp rcd + 6mcb 2 x 20amp 1 x 16amp 3 x 6amp

Would it be ok to use this spare 32amp for the garage supply

Hi all, I'm thinking of using this cable to supply power to my garage which is about 10 meters away from the house, I will be fitting 9 double 13amp sockets, 4 6' fluorescent lights and will be using the usual garage equipment angle grinder/ mig welder/ power tools etc, will this cable be ok [/img]