Search results

Hello all, Im trying to install 2 wooden batons under the rim of my new bath and the problem that I am having is that the walls have been dot and dabbed with plaster board. When I try to drill into the wall im just hitting the cavity inbetween the board and the wall even with long screws. Any...

Just watched the video on loctite 55. Thanks. deffo looks like the stuff required for this type of application!

Thanks for the response guys and I have got it sorted. The s connector is a very loose fit when it screws into the elbow. I wasnt too convinced that the fitting was screwing all the way into the fitting. It may have been a mil or 2 short. I took a hard washer off a tap connector and sat it flush...

Hi guys i wonder if you can help me. Im trying to install a thermostatic bath and shower mixer in my bathroom. The mixer is the type that has to be supported by the pipework. I have screwed 2 wall 90 degree brass elbows to marine ply and they are centred at 150mm. The mixer valve has 2 s...

Thanks ill check it out

Hello all I am wanting to install and heat my bathroom with a towel rail and have calculated I need approx 2000 btus which means one of those massive rails which are really too tall for the wall I want to put it on. I could however install 2 smaller towel rails on the same flow and return line...

Many thanks chaps really appreciate your help. Thank you

Many thanks Terry

The hot actually comes in on 22mm and reduces to 15mm at the start of the bathroom so I can do the hot on 22mm and the cold is 15mm only. Im thinking hot all the way in 22mm and cold mains good pressure in 15mm then step upto 22mm?

Hello all im installing a new bath etc in my bathroom and the mixer valve does both the bath and the shower. The connections onto the mixer are 22mm. Cold water is from the mains (good pressure) and the hot water is from combi. All current pipe in the bathroom including the current bath feeds...

Hi Glowpot Mine is the 24i junior the smaller brother of yours. The official tech sheet says the receiver is for the 24i, 28i and SI Mk2. So no problem. Type into Google the product code which is 7716 192 050 including the gaps inbetween numbers like I have click on the first link which should...

Installed and working well :D

Hi Glowpot....your wiring is the same as mine I have sent pictures to Worcester who have been extremely helpful and have reassured me that it is safe to use. What reassured me was in the manual it says the plug is an ST 5 connection. When you remove your plug from the board it says ST 5 on the...

I received my receiver and digistat today product code was 7716 192 050 mine is the smaller receiver for the 24i junior boiler. I have spoke to Worcester on the phone and explained the situation. Looking at the connector ports on my old timer there are 5 ports. The first 2 ports have no wires...

Hello Glowpot, i hope you got it sorted? I have exactly the same problem with the same wiring. Did you get the receiver to work?