Search results

I phoned the company, they sent a new panel at the same time collecting the old one, alarm working good now thanks again for all your help

I will phone them and see what they say will let you know how I get on thanks

Brand new about 5weeks old

Sorry got mixed up this alarm is driving me round the bend That means a new board then or can oat b repaired

I will return the bell box Thank you for all your help

No just the bell box

Black wire to white tamper sets off external sounder Yellow wire to bell terminal strobe works, but does not respond to code

Opened panel tamper activated turned off with code Strobe not flashing Put black wire back in sounder sounds outside, but will not go off using the code Will only go off when black wire is removed from panel

REASON 8 ADE PANEL OTHER CONT PANEL STB - STROBE- STROBE TRIG- B- BELL- HOLD OFF A- TAMPER SUPPLY HOLD OFF+ D+ BELL + RTN- T- TAMP RETURN PANEL...

took the black wire out of the bell trig in the alarm panel bell did not ring when I set off the alarm bell did not ring either, when black wire was returned as soon as powered up alarm bell sounded would not respond to code, everything else works fine,when I take the front cover off the panel...

if you go up to upload photos I have posted them there

optima reason 8 bell box

Honeywell reason 8 bell box

wiring photos

sorry trying to work out how to upload photos[/youtube]

wiring photos

How I have wired up

I changed the bell box to a Honeywell reason 8 bell box, all wired up cover on screw up still the alarm will not react to the code, I am going to strip all wires out and start again to see if I can find the fault thank for your help

The problem I now have, as soon as I power up the external sounder goes into alarm and pressing the code in does not stop the sounder I have to cut the power to stop the external sounder I have wired it according to the engineer manual

the sounder is honeywell Ag6 sounder and strobe