Search results

Sorry I should have mentioned that in the original post that was my first thought so I bought two new alloys but it didn't cure it no difference and £100 down that's what led me to think about cv/driveshaft ? Thanks for your replies by the way it's always good to have a second brain on the case.

The brakes were replaced recentley so I think everything is fine there.

Thanks again for your reply I have had the wheels balanced checked the engine mounts and everything seems right I was thinking it could be the cv joints that were worn but the gaiters look ok so not sure it does it in all gears from 2500 to 4000rpm most noticeable in fourth but I think that is...

Thanks for the reply surely if it was the wheel bearings it would do it more or less constantly no?

My fiat grande punto has started shaking when accelerating I believe it may be worn drive shafts as it's coming from the front and only does it between 2000-3000 revs and when you drop down below 2000 revs it stops. I've checked the engine mountings and they don't seem loose. If it is the drive...

Thanks everybody for your replies it turned out to be the timing chain that had come off fortuneatly it hasn't,t done any lasting damage and I have got it sorted fingers crossed.

Hi I hope some can help me I recentley bought a 1.0litre 2005 corsa 56000 miles on the clock, the seller assured me all was well so after test driving I parted with my money and off I went. Two days in though the car really struggles to start when it gets cold below 5c it takes several turns...