Search results

I am now on my second lot of washing with the machine working fine but with the door interlock bypassed. Do I need to return this door interlock for a replacement ? When I test it am I correct in thinking I should get continuity between neutral and live ?.

Got new door interlock for £18.99, came home tested it with meter and got same result as with old one :? Scratches head, was expecting to get continuity between N+L but no continuity. Went ahead and fitted the part anyway but with no joy :cry: So I bypass the new door interlock as before by...

After dismantling the door interlock by drilling the rivets then inspecting the various pieces I came to no particular conlusion :) but it was interesting. :lol: Then after looking through numerous other threads on this site I happened accross this one...

I have just removed and tested the door interlock, I get no continuity from any pair of the terminals in either switch position. Is this likely to cause my washer's symptoms ?.

Keithwasherman, that confirms I was doing the test correctly. I am getting a circuit from two different pins in the block one to one brush wire and the other to the other brush wire. Seems the t.o.c is fine. I removed the cicuit board and inspected the tracks and components, these also look...

Should I be getting continuity from two pins in the motor block to each brush wire ? or just one brush wire Im a bit confused here :?

Sorry, what I meant was, I tested from each brush wire to each spade in the block and got continuity from only one spade in the block from the brush wires.

Sorry for the late reply here I been busy. I tested as suggested from the brush wire (disconnected) to each spade in the block, I get continuity from one spade only on each brush. Does this mean the toc is open cicuit ? if it does where is it in the motor and can i get a new one ?. Thanks guys.

Sorry if i sound thick but could you explain this in english please ?. +++++++++++++++++++++++++++++ sorry that was astupid thing to say. I will try what you said and post results Moderator, what did I not take note of in 1a and 10a ?.

Thanks for the the input guys. Keithwasherman, I didnt realise that but the model is wm62. fido, I will try that tonight when I get home and post the results. Many thanks. +++++++++++++++++++++++++++++ Ok i've tried the suggestions so far, Firstly I realised the cheap meter I...

Hi everyone, I have a Hotpoint aquarius 1000 and when I turn it on it fills with water and appears to go through the programme somewhat faster than it should, but the drum never turns. The timer stops at rinse part too and stays there. I have checked the brushes in the motor and they seem...