Search results

  1. G

    Glass in her ass

    Thanks for the advise guys but she only wears steel knickers when we are ready for bed.
  2. G

    Glass in her ass

    My wife and i have been installing downlighters in upstairs bedroom, we were both in the loft and my wife was sitting close to the insulation wool while wireing the lights and is complaining of a sore arse and says that it has fine peices of glass wedged into her skin which has come up as a...
  3. G

    Am i overloading the circuit

    Yes the dimmers are halogen rated and can use mains halogen bulbs GU10`s but not wirewound low voltage lighting transformers. Can you tell me if i can use a 13amp unswitched fused connection unit instead of a 5 amp.
  4. G

    Am i overloading the circuit

    Crafty1289 thanks for your help so far mate, ive now decided to stick with the 50w halogens with dimmers, im going to use 9 downlighters in the large part of the lounge and 5 downlighters in the small part of the lounge 14 in all. The dimmer i have bought is a Varilight 3 gang 2 way (3 x...
  5. G

    Am i overloading the circuit

    crafty1289 im a bit confused about all this, i thought that my 1st idea of using 16 x 50w 230v mains downlighters totalling 800w was way to much load when also adding the rest of the downstairs rooms, but you say that even using 16 x 50w LV downlighters will be the same amount of watts.
  6. G

    Am i overloading the circuit

    Ok i have added the total wattage for the lounge, kitchen, consevatory, hallway and downstairs toilet, this is if i wanted these spots 16 x 50w total = 1520w. So this is not going to work, i think i will have to use lv halogen downlighters with dimmable transformers. Could you tell me what...
  7. G

    Am i overloading the circuit

    This is my lounge:
  8. G

    Am i overloading the circuit

    I have drawn a picture of my lounge in (.bmp) can you tell me how to upload to this thread.
  9. G

    Am i overloading the circuit

    Come on guys i like light (only joking). My lounge is 19ft long x 14ft wide narrowing to 9ft wide, i have a beam in the ceiling about 13ft down the lounge running left to right which kind of splits the lounge, i wanted to fit 11 spots in the large part of the lounge and 5 in the small part...
  10. G

    Am i overloading the circuit

    I have just bought 16 halogen dimmable downlighters without the need for transformers from B&Q and i am planning to install all of them in my lounge, i have noticed that they are GU10 50w each which would equal 800w just for the lounge and i still plan to install the same spots in the rest of...
  11. G

    Is this a safe install for spot lights

    Hi all could anybody help me, i want to install 4 spot lights in one of my upstairs bedrooms i have recognised my lighting circuit to be a loop in circuit in the loft. Can i connect the mains and the switch cable to a 4 way junction box, then connect 2 spurs off of the 4 way box and on each of...
Back
Top