Search results

Great thanks I didn't even realise they were clamped, never had a chance to watch them get installed unfortunately

Hi I had some sky lights fitting in to my kitchen extension about 5yrs ago and after the recent storms I noticed two of the plastic end cap pieces have come off due to the plastic breaking (see pic) I've found what looks like replacements here. I'm concerned that when I unscrew the end...

I bought the plastic trays but then had an issue in the family so at the moment it's yet another job that needs sorting

Thanks for the response. It's a shame using flexitec is causing this to be a pain. Two roofers have now told me they would clean the roof and put a top coat on, however this doesn't seem to be an option which is a pain.

Sorry to ask for more info. So from what you have said if I don't go down the liquid rubber path then if the roof is cleaned correctly a normal grp type top coat should be fine but Restec who sell Flexitec wouldn't be ok with this which I would be fine with I think Also as I mentioned the...

I'll be getting a different roofer in. Not the original guys who applied the flexitec. Are you saying that you can't use a different top coating because it won't adhere chemically after sanding or that flexitec won't back doing that due to warranty. I'm not really tied to it with a warranty...

Thanks for that's. If sanded back would it need the same top coat as the original (flexitec) or would most grp top coats be suitable?

Here are a few shots. I had a walk around on the roof and the fibreglass doesn't appear to a delaminated.

Hi, I had an extension done 5 yrs ago with a grp roof (Flexitec) and a couple of sky lights. It isn't leaking however it has always pooled just by the drip edge (not sure if that's the correct term) and was getting fairly filthy. I went up to clean it and realised that most of the surface has...

Ah ok, well the breast has a flue for upstairs and downstairs so I would have to figure out from outside the path of the flue to the bedroom and break in to the bricks there, ideally behind the upstairs fireplace.

There doesn't appear to be a vent. I previous owner probably a long time back must have removed the fireplace in the bedroom and sealed it up and removed the second pot from the chimney. I'd assumed this meant the whole flue to the original bedroom fireplace would have been sealed off so no...

Sorry when I said capped I probably used the wrong terminology. It's got a pot but there is a cover held on with wire which is 3 or 4 inches above the pot. The chemicals you mention drawing the damp through the breast is what next door was told about his so it could well be that. I think he...

Hi a couple of years ago I noticed that there was a bit of bubbling under the wallpaper and in a bit of the lath and plaster in ceiling just above on the top of the chimney breast in my front bedroom. At the time this was almost certainly from some leaking above in the chimney stack and the...

Hi basically who has ever installed the original pvc frame had drilled in the wrong places and water which should have been going elsewhere was going in to the holes. In the end I just replaced all my windows because I had to fix other issues to and decided getting some new ones rather than...

Just bought some from TP so I will give it a go over the next few days, thanks for the tips. The downpipe is in the corner of the L on the roof and is basically just straight down so I think the issue is that the gutter is a bit too small for when it's real heavy rain. Next time I'm going to get...

Yes the roof is at the back and side of the house (L shape around the house) and the main roof has two gutters also running on to it. Its about 35ft wide at the back, by about 7ft and the dog leg around the side is about 22ft by about 7ft. Yes I thought it needed more overhang. All the other...

Haha nah its mainly wheelbarrow and heavy green bin but sometimes workmen and window cleaners also. I'm just concerned if they break it it will be a right ballache sorting it out.

Hi I have a pipe coming out of my wall in to my alleyway which I think is to allow water to run off from the boiler. I'm a little worried I might break it when going up and down the alleyway. Any idea if there is some kind of metal guard available to cover something like it. I'm not even sure...

Hi, I had a flat grp roof done a few years back and its been fine, however I've had issues with the rain in places running over the edge and not in to the gutter but dripping behind it. Also when it is really heavy rain the gutter just can't take the flow. I've tried putting laying a roll of...