Search results

The door now won't open fully and It won't work to swing the door the other way or outwards (small bathroom/small flat).. It's wall panels so to remove I'm told would be quite a bit of work to re-instate due to holes left etc. I did ask that the Towel Rail was put on that wall but not behind a...

Hi, I've just fitted a tap recover kit to a tap that was jammed however the tap head is not coming to an end point, ie, on or off, just spinning around, any idea what could be wrong?

I didnt realise the screw on the other side would pull it further in. Thank you very much, that did the trick

My sink is leaking from the overflow drain pipe connection. It is a Pyramis Athena Compact. Does the connection simply pull away so I can put a new seal on?

Hi, I got a new kitchen fitted, by a kitchen fitter contracted by a very well known UK kitchen company (that attracts metal) where I bought kitchen. The fitter came in and said his electricians wouldn't work on non-RCD. He said the box would need upgraded and this would cost around £500. I also...

I need to change a mixer tap but can't find the mains water valve. Will turning the two valves? in the picture with a flat head screwdriver shut of hot and cold water to enable me to change tap?

Thanks, no it's a loft so that rafters needs to support the roof at that point, I take it that doesn't change anything?

Is the damage significant enough to need to do anything about apart from blocking access routes etc?

Thanks Thanks Rob..yeah that is my stair/landing and front door. I thought it might be tricky as it's too low to just let if flow out of the outlet so putting the plume kit is the only solution they had but it doesn't seem right that it's so close to me now. It does drift into my flat if I...

My neighbour in the flat below had a new boiler installed about 1 1/2 yr ago. At the time I did feel the boiler plume was a bit close to my flat, however I checked regs and found that regs state it needs to be 300mm away from a window (which it is) so I thought there was nothing I could do...