Search results

The painted bulbs work fine so changed all 5 lamps to 35W.

Given the price hike in electricity just painted up a couple of 35W bulbs I found in my spares box using the paint as recommended by G4FAQ. At least that will be 30W savings. If they work well, I will consider replacing a couple more.

GadgeSxi, have you verified the transducer is making contact with the spring contacts? You can see the transducer is working by removing the vapour tray and visually inspect the item sitting in the reservoir. Should have tiny bubbles being formed. If it is working then ensure the fan runs.

Well after several false starts thinking it was a lower sump fault had a poke around the main control board although nothing stood out as the fault. Then decided to isolate the output side of the transformer to check that it was not a short on the output and to my surprise the entire wire came...

I have a CGN20 stove type Opti-myst which has now stopped working. About 2 weeks ago it started to emit a strange smell, something like damp clothes or a swimming pool not what I would say was a burnt component type smell. Any way I cleaned the sump and this seemed to reduce the smell and the...

For those that have a lower sump problem on these fires its cheaper to get the item serviced by Dimplex rather than purchase the item yourself. Cost of a service is £140 and includes all parts in the price.

Its the smoke that has failed as the lights suddenly switched off. Suspect it is a fault on the water level circuit or the ultrasonics as the lights illuminate for a short while and then turn off. Normally with low water the lamps only dim so the problem could be a fault with the ultrasonic...

Have a CGN20 Dimplex fire what has suddenly developed a fault. Flame effect illuminates for about 45 secs and then switches off. Have inspected the sump pcb and there is no obvious burnt or damaged components. Given that the sump is very expensive, am I correct that this unit is the most...