Search results

Thanks Sajeel, the light fitting is fine we have had it up before the only reason this has happened is because we had a ceiling rose fitted so had to rim back the wires to fit. We did follow all instructions and both are still beeping there is a faint blue and brown as somebody else has mentioned

Hi all thanks for your help. We are finally working on this. When we look at the wires under a bright light we can actually see a very faint blue and brown so are assuming they are correct. We have tested using the continuity meter as you advised however both live and neutral beep for both...

Hi they are normal screw bulbs picture of connection attached. We were advised to use a multimeter on continuity to find the earth and unsure how to actually do this and what we are looking for when we connect 2 wires

Not sure our question has been understood correctly we are keen diyers and have fitted plenty of light fittings. Attached is a picture of the wires to the chandelier which you can see are identical. Having never used a multimeter we need to know how to use the continuity setting to wire...

Its actually a chandelier fitting we are putting up and the wires from the ceiling are fine as sleeves on them but the chandelier itself has 3 wires all identical so we need to know how to test these using a multimeter to check we are connecting correctly to the ceiling wires

We are putting up a light fitting where the wires to the fitting are all identical with clear wiring. We were advised the check the wires with the continuity setting on a multimeter but using the instructions its unclear how to do this. we just need a simple answer the wires from the ceiling...