Search results

I'll order the correct one !

Not sure, one I was given which is why I wondered if it has to be a pyronix one

Thanks for your reply. I tried this but the tag wasn't recognised - Are pyronix tags unique? - not sure of the make of the one I tried!

Hi there, I would like to use the tag reader in the main panel - does this need to be enabled for use in a menu first before trying to add a particular tag & user? Hope someone can help - thanks.

Of course!

.....and it all works! Out on interest, on the Enforcer display panel there is the letter "c" after the time - does anyone know what that is there for please?

PSU is a 3amp Elmdene with a 7Ah battery back up. I'm hoping to use the oem for a bit of home automation if I can suss out the programming. Thanks for your help.

Sorry - more questions (but I have used google!) So, I've now got an external 12v psu for the vocaliser and an oem8r8t module. Before I power up I'm looking for reassurance that I'm correct - for the oem wiring : on the 485 bus "in" I will have the d1,d3 & d4 from the 485 bus from the Enforcer...

Google is very useful but imo there's no substitute for experience - although I'm still not convinced that vocaliser will trigger!

If & when I fit an output module do I need to use special cable for the 4 wire bus and what would be the maximum distance it could be fitted away from the enforcer?..

I was probably only going for the smaller 8 relay Pyronix oem which I believe will need a separate psu with battery back up. As far as powering and triggering the vocaliser - are you saying that if I use a separate psu then it will trigger ok as long as the negatives from the panel and the...

Thanks for this. I was hoping to reuse my Pyronix vocaliser with my wifi enabled enforcer so I have a back up alert system using the pstn. I am already using a delta bell x in scb mode and an internal sounder so will be drawing about 170ma in alarm as it is. If i used a separate psu for the...

Can anyone confirm the max current you can draw from the 12v aux power connectors for wired bells, internal sounders etc please - not sure if 250ma or 500ma (not counting the power consumed by the unit itself) Thanks!

You're a star - thanks.

Can anyone suggest why there is nothing being displayed under the History tab on my Enforcer app? All seems to work ok and I get push notifications ok but the history section is blank - not a major issue but would be nice to get to the bottom of it. Thanks in advance. Bob