Search results

Thanks GalaxyGuy. Thats very generous of you. I will send you a PM.

I tried the strobe and bell on op2. Only the strobe flashes. The bell doesn't work. For now I've connected the indoor siren and outdoor strobe to op2. Alteast I will have some sort of notification when an alarm goes off. I suspect you are correct that the siren is also faulty. I will fully test...

Purchased from ADI so hoping their returns will be decent if i have to return. I just tried op2 and it does sound. What would you recommend I do next?

I connected internal siren as instructed. All I got was a shhhhhhh sound. Voltage read as 1.5v when testing. Could it be a faulty panel somehow? I’m hoping it’s not as it’s going to be a hassle taking it out. Is it worth while getting a professional in to fix it?

No join. Same wire. Someone else got on a ladder and did the other end of the wiring so i just matched it up on the panel end to the appropriate points. I have an internal Honeywell SP20ST sounder https://www.security.honeywell.com/uk/products/intruder/alarm-communications/sounders/524172.html...

Also using a multi meter, I get 11v on OP1, 13v on OP2 and OP3. I should also note that the sensors also give out 13v. Strangely I get only 3v at the other end of the internal sounder wiring and 4v when i set this to test. I can't get up to the bell box on the wall outside to test that end but I...

This is the wiring. I am taking 12v from sensors. My AG6 is connected as per instructions to OP1 and OP2. OP3 is my internal siren which is SP20ST.

Tried moving the trigger which I guess is op1 to 0v and nothing changed. I am testing on menu 32 and bell output which is 1001.

Tried it and it doesn't sound it. Tried connecting bell directly and it works when i connect it directly to 0v and 12v. But doesnt via op1. So confused. Why do alarms have to be so complicated?

Yes purchased new. I will try this tomorrow and let you know what the results are.

My external bell box which is a Honeywell ag6 does not work either. All it has is a red light illuminated on it. This is how I wired it. 929B2C8E-1B29-40D0-A43B-9CF6C8663E0B by eshaq786 posted 29 Apr 2018 at 9:13 PM Tamper to T ST to OP2 S to OP1 V+ to 12v on sensors V- to 0v. Do I need to...

Ag6

Would this work connected to the 12v intellibus?