Search results

Hi, It’s a fulleon firecat multi sensor 12v

Hi, I’ve put some pictures on.

Hi, I’m looking for some help on the wiring diagram to add a smoke detector to Honeywell galaxy panel. Lee.

Hi Guys, looking for a bit of help! I’m working with a young boy with autism who is obsessed with ADT Honeywell alarms. He has been tampering about with the schools system and is causing a lot of problems. I’m looking to obtain some old kit for him to set up in class as a little demo board...

There is 5 wires in the panel because there is an internal sounder wired up to that the outside bell is wired to 1003 and the internal sounder is 1004

Yeah I did it just goes to a site saying server error the requested page does not exist or may have expired 407

Hi as requested

Hello, can someone talk me through the wiring set up for a Chubb delta bell we have tried but I don’t know if we are wiring it up correctly as there are many more terminals on the bell box than any other siren we have used. Thanks in advance :) Lee.

Here is the image

No he didn’t enrol them hence I’m looking for help.

Hello Guys, I was left some small colourful key tags to add to our new home alarm. However when trying to add it asks us to enrol now or enter ID however these small key tags don’t have ID’s and when we try to touch the panel with the key tag it doesn’t register etc … has anyone got any advice...

Hello, Could someone help me out with the wiring diagram for adding a euro 46 keypad to an enforcer wireless panel please?

Hello, Not as far as I’m aware.

Hello, we have an interlogix advisor advance ATS2000 panel, we are trying to modify some zones but when using the programming code it’s asking for challenger code response? can anyone tell me what this is? Lee.

Thanks for your help and understanding.

It doesn’t indicate if it’s the red or black cable that goes there so it’s not very clear. I don’t have much experience with this I work in a school and they have asked me to switch it over.

It is being replaced with the Kintec unit. The only issue is the cabling will be different as the current set up is wired to output 1003. All I need to know is where to connect the Kintec wires to on the panel. Lee.

Hello Thanks for your reply. Please see below - the cable currently is connected to output 1003 on the panel and the red in the positive power section.

Hi, could anyone tell me how to wire a Kintec extension speaker to a Honeywell galaxy G2 panel? The speaker only has two wires (red and black) it should have been a straight swap of the existing speaker with a red and black cable going to the same outputs on the panel, however when the alarm...

Hi Jon, Just confirming if you are still happy to procced as planned? Lee.