Search results

  1. V

    wm38 baxi overhaul problem

    took the plunge.... when the water reaches the temp required the boiler dies down , valve stays open so i assume all will be ok learn by doing?
  2. V

    wm38 baxi overhaul problem

    just had a look at the wiring for the valves and noticed something odd...... 5 wires come out of the valves both hw and ch but only 3 from each go into the programmer..... the other 2 are snipped, now this has been like this since i moved in 8 yrs ago and the heating has always worked ok...
  3. V

    wm38 baxi overhaul problem

    not sure i have one.....the system operates on one pump which after then splits into 2 pipes and 2 valves ( 1 for hw and 1 for ch)
  4. V

    wm38 baxi overhaul problem

    just manualy opened the hw valve and the boiler starts up so i think it must be a problem with the communication between the programmer and the valve.
  5. V

    wm38 baxi overhaul problem

    Hi guys I have a baxi wm38 that has recently had a new thermostat, programmer, thermocoupler and main gas valve. (yeh i know probably cheaper to replace it) The problem was I woke up one morning to no ch or hw..after getting these parts replaced i now have ch but no hw... I was wondering if...
  6. V

    C.H. Boiler not firing

    sorted needed new main valve
  7. V

    C.H. Boiler not firing

    HI GUYS I have the exact same boiler with the exact same problem i have replaced the programmer and the thermo coupler. i have also bypassed the thermostat but to no avail any help would be very very grateful thanks
Back
Top