Search results

  1. A

    Euro 46 V10 - First time Installing an alarm system

    There is a fuse above keypad terminal, one is battery and the other I believe is for the keypad. Check the fuse. Should have 12v
  2. A

    Euro 46 V10 - First time Installing an alarm system

    Hold down D on the keypad, after while it should say security code, if nothing happens at all then looks like 12v issue, because just 12v on the keypad you should be getting message saying RS485 failure. Also try down power and power back up
  3. A

    Euro 46 V10 - First time Installing an alarm system

    Bottom JUMPER on the Deltabell, looks like it is set on external battery, you want that to be on internal so in a event of the panel power not working it will use the battery in the bell box. You don’t need the green cable in LED on the PIR unless you want to disable the PIR LED light
  4. A

    Cordless door bell Fauty in windy wearher

    Actually there was four gates, three houses, smaller houses had one slider per house whilst bigger house which was top house had two sliding gates. They are 3-4 bed detached homes with a side gate to get to back garden. Top and bottom houses had same builder who does “electrical” work, and don’t...
  5. A

    Changing Pyronix Cloud account

    I believe and can be corrected. If you have all the codes, you can changed the App password and change all the codes. If so and you have changed them all he won’t be able receiver notifications as the account details are wrong. Happily to be corrected
  6. A

    Cordless door bell Fauty in windy wearher

    Completely unrelated to weather issue... But I installed three sliding gates in West Hampstead with the middle one being last one to install. First house I done put a wireless door bell on there house, works perfect. Installed the middle sliding gates, and intercom. Works perfect. Ten months...
  7. A

    Maxxone Kite Smart Wireless Alarm

    I would save your money.... It doesn’t look graded, and it screams DIY alarm system,which I am not surprised by. Also for the price, you could get Enforcer or Texecom kit for the same amount. Enforcer you can add Wifi cameras and have one app with cameras and alarm. Hope that helps
  8. A

    Enforcer Remote Keypad Set Status

    Erm it is bad idea showing what set you have set. But if you have one on the landing and one in cupboard downstairs hidden, it’s pretty unlikely joe bloggs outside would be able to tell. It’s a bit like making the bell chirp or flash when set, that tells everyone the alarm is set. I have only...
  9. A

    Enforcer Remote Keypad Set Status

    I’m going to guess probably not as that would drain the battery in keypad.
  10. A

    Access Control System to open front gate

    Erm Cat5, you could look at BPT IP360, have one handset inside but also linked to your phone/tablet so whoever calls you can talk to them. Only issue it will cost you.
  11. A

    Unable to set Pyronix enforcer 10

    Have you got a door contact on the front door? If so when you open the door does the beeps change when you set the alarm?
  12. A

    CCTV Spec Up

    I would personally put four cameras in and put the cameras at the corners, so each camera is covering the over camera. I’m guessing you are going down Coax Hikvision PoC route as IP is expensive. Personally if it is just general area you want to cover then I would suggest to install fixed...
Back
Top