Search results

Thanks - So OK as far as Part P is concerned and no need to notify there fore I can do it myself. Technically though is it OK to add the extra sockets to what appears to be a radial??

Hi all Want to put a couple of extra double sockets into my garage. Currently there is one double which appears to be fed directly from the consumer unit, presumably making this a [short] radial? Is it ok just to extend this radial by two doubles down one side of the garage? Is this...

All Just fitted a new rad and annoyingly one the the valve tails has a very slow leak. As I've had to redo pipework to accommodate different size and used compression I'd rather not have to strip everything down again, is there anything I can do (e.g. Fernox Leak Sealer into the top of the...

If its sticking at the pumping out stage then my WM36 has similar issue (see thread and discussions with breezer on WM36 Continuous Pumping), currently about to investigate water sensor attached to the pressure switch, like you I've disassembled and cleaned pump etc with no joy, another source...

Great, will give that a go. Not sure where to find the pictures though....agotpoint ????

Thanks breezer - its knocking on 10 year-old so free parts long gone So its a timer-controlled pump then, as opposed to one controlled by a water "sensor" ?????

My hotpoint WM36 has developed a tendency to continously try to pump out wasted water and "freeze" mid-cycle (either rinse or spin) - you can hear the pump working when there's no water left to pump and it just keeps on pumping. The only way to stop it is to turn off the power. I've...

Yep, same problem here, although only in two radiators, I've heard several theories, one relating it to thermostatic valves being partially closed, another from the british gas engineer putting it down to thermal expansion in the system! My pump has two speeds and selecting the lower speed does...