Search results

After 06, lights persist. Pressing reset x 3 clears all lights but doesn't enter into the walk test mode. Entering user code or entering program thereafter doesn't do anything After entering 11 - no change. Then pressing reset causes all zone lights to come on and stay on

After 06, lights persist. Pressing reset x 3 clears all lights but doesn't enter into the walk test mode. Entering user code or entering program thereafter doesn't do anything

Thanks. Tried 19 as well, same results (all zones' LEDs on)

@secureiam checked the voltage across the auxiliary points and there is a voltage of 12.02V across it. A voltage across the power points on the PIR is 11.87. Therefore there appears not to be any power loss, blown fuse or short circuit.

@secureiam much appreciate the response. FIL said he would check the power to the PIRs this evening - if no power, then would check the fuse and replace it, and take it from there

Hi, New user here. Father-in-law recently installed Vertias8 alarm system in house. Installation seems fine as this is replacement on an older model. However walk test seems to be giving an error. As per the guide: "The control panel has a Walk Test facility to check the operation of the...