Search results

The power will be fed from that fused spur directly above the keypad. Probably a backup battery inside the keypad case as well.

That is the way I would have cut it as well. A little more work but an easier joint to make good and it can be made and applied as a single piece.

Tape and a bit of hard plastic from a bottle or tub out the recycle bin. Should be able to fabricate something to seal the back. I had to do that with the remote arming station. The spring was so strong it punched the back of the box out. My fix above cured it.

Well, my system is up and running now, thanks for the pointers to finish the setup. I don’t think there is anything more to do except setup the cloud account and connect it to the system. Oh, and physically fit all the sensors and keypad to the walls in the house. what led me to buying the...

Rub whole top down to 150, then three coats of Osmo Top oil, one coat a day over three days or at least 12 hours between coats. very lightly denied between each coat. Then use heat mats or trivets.

Understand that, one reason we bought from a local supplier. SIL even took a trip uup North, to see the showroom before committing. Unfortunately I’d ordered mine before he’d fitted his.

Just had a Shereton kitchen installed. Excellent quality, but twice the price of DIY kitchens on Yorkshire that my nephew used, and his cabinets and doors look identical to mine. He even had a colour choice that I didn’t, any Farrow and Ball colour. If I had to do it again, I’d absolutely use...

That’s standard Ogee skirting, cut on a 45 across the wall end. You can just see the hairline join on the diagonal. It was done that way to finish off on the face of the wall instead of returning round the corner.

Excellent, thanks. I’m used to backward compatibility issues with computer operating systems and hardware. Will get it posted to me, it worth a punt then as an unset device for the bedroom just set to set and unset B.

As an aside, does anyone know if the smaller square kf4-we key fob will programme to the V10 as I believe it was released for the 32we? I have been offered one but don’t want to have him post it if it’s incompatible. Thanks.

That’s one problem that is no longer a problem. thanks sparkymarka. relearning worked a treat, two new fobs for £20, came as part of his kit he didn’t want. onwards and upwards.

Update, have found Spakymarka’s kf4 manual which I’ll have a go with later.

Yes, they were new, other. Tested not used. Have just been looking at one of your other posts where you mentioned defaulting the key fobs. Haven’t found the process for this yet. Is it a button press combination?

Thanks for suggestions to both of you, it’s appreciated. Well, I tried all the settings for pin restrict, but the pin works on the main panel so had little hope that was going to cure it. I did have a phone conversation with the supplier who talked me through several options, all of which were...

Thanks for input I’ve checked the options and permissions are set for the arming station to set/unset all areas and is programmed to be in all areas. Should it only be set to be in one area? Will try that option of only setting in area B as that is the only area it will be required to unset.

I have completed a basic setup and allseems to be working fine, except the user code doesn't cancel the countdown trigger from the remote keypad after an area entry, whether that is A or B I created a user that can arm and disarm all modes. I've checked the user code user set option and...

Well, decorating projects have been mainly accomplished, now on to the alarm. I have the Enforcer V10 being setup in my workshop and have added all the sensors no problem. When setting up input types is there a type I am missing whereby the Final exit in A becomes intruder in B? I know of Fx...

Hi All I am looking to purchase the Pyronix wireless system kit and was curious as to whether the wireless remote keypad has the capability to make the chime sounds as well as the main panel. I wish to have a keypad at the front and back doors. We use either depending if we’re taking a car trip...