Search results

Yep, Hep20

I’m hopeless. How do I disconnect the plastic tubing from the copper? Doesn’t seem to just unscrew as the plastic bits just turn and turn

Cheers will take a look

Ah I see what you mean Both taps are the same - see pic

And finally the hot water in two sink taps seems ok, it’s just the cold which is really slow

Also the hot water comes from the tank rather than mains fed?

Just the hot in the shower, the cold was completely clear. I took the tap apart and the filter in the white plastic cartridge seemed clear.

Any thoughts on the low cold water pressure in two of the rooms?

Hi, now the shower filters got blocked again with blue gunk (see attached) which I’ve cleaned. Not sure what it is and why it keeps building up? But in addition the pressure from the cold tap in the en suite on the top floor and the downstairs loo are low but the kitchen and 1st floor en suite...

The hot one was pretty much totally blocked yep

Sorted! Thank you very much, greatly appreciated

Here is a pic - thanks

Any ideas on what I can check shower wise or will I need a plumber?

Just the sink in the en suite although it’s harder to tell the water seems to be ok pressure wise and definitely heats up more quickly than the shower is doing

I didn’t know it was against the rules, just joined. I’ll know for next time.

The pressure on the first floor shower is fine, just the one on the second floor that is the problem

I have a similar setup - Ive turned the valves on the red cylinder and the pressure is back to 1.5 but it hadn’t made a difference to the low pressure in the shower on the top floor. Any ideas?

I have a Range tribune HE with two expansion vessels. We have two showers, one on the first floor which is fine but the one on the second floor’s pressure has dropped and it takes ages to get hot water coming through. The reading on the dial on the red cylinder was 0 so I turned the two valves...