Search results

  1. G

    Baxi Banama 100 Combi Boiler internal water noise problem

    After all the above, I still have no solution. :( I am thinking of reducing the maximum gas pressure to the burner by turing the outer nut on the gas regulator a little (anti clockwise to reduce pressure according to the manual). This should then reduce the amount of gas to the burners at...
  2. G

    Baxi Banama 100 Combi Boiler internal water noise problem

    Hi Thanks for the reply. Pressure is running at 1.4 bars cold, and approx 1.7 bars when hot. I'll try increase it so see if it makes any difference. however, I have noticed that if you turn on the HW, the pressure drops slightly to say 1.2 bars when cold. I assume this is because the boiler is...
  3. G

    Baxi Banama 100 Combi Boiler internal water noise problem

    Many Thanks. Sorry for not mentioning that. Due to all the problems in the past I clean the flow switches and the AAV every time I drain the boiler. I thought of flussing the system next, but it makes no sense to me that prior to my expansion vessel failing, the boiler workt perfectly without...
  4. G

    Baxi Banama 100 Combi Boiler internal water noise problem

    Thanks for your suggestion. I've checked all casings and yes they vibrate a bit, but are not the cause of the noise. Regards Gareth
  5. G

    Baxi Banama 100 Combi Boiler internal water noise problem

    Hi (Sorry, posted this in the appliances section as well) I own a Baxi Bahama 100 :( (came with the house) and have had al the usual problems in the past 3 years (flow switches, leaking tubes to pressure switch, faulty PCB, faulty automatic bleed valve etc.) However there is a new...
Back
Top