Search results

Thank you for that. I will give it a try. regards mickfos

Hello, Could anyone please advise me on how to point a small section of brick work on a 1970's built house. I have 2 rows of bricks above the garage which require pointing and I was wondering if it is at all possible, to get roughly the same colour mortar as the rest of the house. I realise...

Hello, I am looking for any ideas that anyone may have, that would help me in covering damaged brickwork on the outside of the house. The damaged area is 8" square ( 200mm ). This was caused when the previous owner installed a garden tap going through the outside wall of the utility room...

The noise did disapear after 10 - 15 mins but I must admit after the heat exchanger was changed, I do not have the problem. The engineer may have adjusted the gas pressure, after fitting the new heat exchanger but I could not say.

Hello, How do I know as a layman, if my central heating system needs a power flush. I have a combi boiler and a micro bore heating system. I have a 3 year old Baxi combi boiler which was fitted by a heating engineer. He did not flush the system when the boiler was fitted and I have since had...

Hello, I have been advised that the whine from my central heating system. ( the central heating system is 8mm micro bore from manifolds ) which is fed from a Baxi 105e combi, could be sludge in the system. The system was not flushed before the new boiler was fitted. If as suggested I...

Hello, Can anybody please help me with a self inflicted disaster ?. I have managed to sratch, a large double glazed pane of glass in a conservatory. I managed this by slipping with a portable sander, while stripping down the woodwork. Is there a succsesful way of polishing a scratch out of...

Thanks for that BAXMAX,I will give it a go.

please help, Ihave a noisy Baxi 105e ( whining loudly when cold and a lesser whine when running ) this throughout the whole central heating system. I have a central heating system that has 8mm micro bore and have been advised to have it flushed, as I have a noisy boiler/system. Can I do this...

I have been advised by BAXMAX, to flush/inhibit/cleanse my central heating system, to try and cure a noisy Boiler. Can I do this myself or do I need to get a heating engineer ?. If I can do it myself, how do I go about it. If I need someone to do it , has anyone any idea of the cost for a...

Thanks for that. What is involved with flushing the system. Do I need to get an expert to do this, or can I do it myself ?. If I need to get someone to do it, can you give me any idea of the cost.

Thanks for the reply, The boiler is 18 months old and the system was not flushed. All the installer did was fit thermostatic valves to the radiators. There is no divertor valve on the system, so I belive it is a heat exchanger system. regards Michael Foster

We have a Baxi 105 combination boiler which is approx 18 month old and we are now getting a whine, which can be heard through out the house. Also when the boiler is cold and the central heating kicks in, we then get a very loud whine from the boiler for a couple of mins. It then resumes to the...