Search results

I will do that. I turned the hw down to the minimum, 35 degrees and after running the hw tap for a couple of mins, the display temp was 47 so it has come down. 47 feels a bit too low for washing up so I’ll set it at 40. Thanks everyone.

Sorry, 2020 just before lockdown and North Staffordshire. New neighbour is a heating engineer and said he would charge around £3k for what we had done.

It feels just as red hot coming out of the tap but obviously without a thermometer it could be cooler, I set it as low as 45 but it still felt very hot, I’ll set it even lower and try again, below 40 should only be slightly warm. It has to go about 1.5 meters to get to the bathroom tap, so...

We paid £2700 for a 28kw Vaillant combi, removal of HW tank in the loft, re-routing of all the pipework to upstairs and extended flue up and out of the loft and out under the eaves, plus half a dozen Trvs. I think the cost of the boiler + £1000 labour and a bit of pipework is more than fair...

I’m trying to alter the hot water temp and the flow temp on said boiler. I’ve followed the manual, thought I’d set the HW to 55 degrees but when I run the HW it goes to 65 degrees on the display. Obviously rads aren’t on so can’t check on that side. Both temperatures that I’ve ‘set’ are...