Search results

The new programmer has now stopped the bypassing. :D The water is now cycling every 2mins until it reaches temperature,then it shuts down and performs normally(say heats up only when required. The heating however, once it reaches temperature shuts down and continues to cycle every 2 mins...

The sparky found that the programmer on the heating so we replaced and that stopped the bypassing,but we are still cycling every 2 mins when desired temperature reached.Do you think there could be a big airlock on the heating system>

Had a call from the sparky to say that he has spoke to the gas engineer he is working with about the 2 min cycle on the heating side, and they seem to think that the pump is not taking the hot water away quick enough (up three floors).The reason it does not cycle every 2 mins on the water is...

Hi,Well here we are again with the same old problem.The electrician tested the programmer and the motorized valves.The programmer heating side and valve on the heating both faulty,(what a coincedence) so we have replaced,brilliant :lol: . Guess what :?: ITS STILL F-----G CYCLING EVER 2 MINS ON...

Hi , I am glad someone can laugh about this (although I did have a chuckle myself when reading it again). :D :D Is there a way off testing the valve or is an electrician again :!:

The wall/room stat is in the hallway where i have a radiator with the valve on fully opened(5). The problem occured about 5 days ago,plus its the same cycle even if i run the hot water only.[/b]

Hi, its a new honeywell wheel stat.

Hi thanks for your reply.This is a long story so here goes,this problem occured a few days ago ,the plumbers are tied up for weeks(all of them)so they say,so i phone the plumbcentre and speak to their top guy(so they say)i explain the problem about the boiler cycling ever 2 mins.It sounds like a...

Hi.I have Ideal mexico 2 125cf boiler.Once the heating and water reaches the desired temperatures the boiler kicks in for 2 mins then shuts down for 2 mins ,this continues indefinitely in auto or manual mode.I have replaced the boiler stat and thermocouple, room stat,a new programmer , but...