Search results

Having a quick read online, I’ve seen someone suggest a galvanised trouser box which would be a lot smaller and conspicuous than a wiska box, has anyone ever terminated to one and what would they need?

Hi Adam, Thanks for the reply, will have to double check I’m sure it’s a type b been a while since I checked tbh. Yes I’m aware armoured must be earthed, just like having a clean install. The isolator is going to be meter or so away from the FCU would running NYY-J be okay? Was always lead to...

So I’m installing a 3.5kw Samsung air conditioner / heatpump for my main bedroom. Power draw is around 1kw and 4.2a ish max for both heat and cooling. Plan on running this off a fuse spur as getting access to the consumer unit would be extremely costly pulling the flooring up downstairs as...

Just to add, the lights in question I have already in the back garden. But I have the 12v power supply plugged into a weather proof socket and the brick sits outside the socket itself. Which again is ip68 but id rather not have it laying around like this on the front. Hence the question about an...

Sorry if my terminology isn’t correct, Its a 12v power supply with a 3 pin plug which connects via easy connections to each 12v LED in a chain. I can change the cable lengths between each 12v led as I see fit. It will be ran from either an in-line smart switch or 3 pin smart plug. No issues...

Hi I’m planning on running led lights down my drive which are 12v. I have armoured cable clipped down the side of the house which runs to the front. It goes under the patio and back up the onto the garden wall which leads into the front of the house. This is on an FCU from the back of the...