Search results

I dont want to use the same language as you mate but if you have nothing constructive to say then you shouldnt open your gap! Your situation might be different but I have a toddler and another baby due anytime now. We shut all three room doors so they are ok as soon as you come out into the...

No there is not a single hole in the wall. I would have filled it even if there was a mm crack :wink: I hope there is no paranormal activity in that area but that area has constant cold breeze. Its low on top of the steps in the middle. There is no covering under the steps its all open...

I put draft excluder in last night. The loft access has no air circulation now. Even then there is breeze near the stairs. One thing to note is that the side wall as I mentioned is about 50% externally exposed. I have checked for cracks though. The loft is insulated and boarded as well. It...

Many thanks foxhole, I am planning to insulate the loft access but there is no cold air falling from there. Only the hot air is going up. There are no signs of cold or for that fact any breeze at all upstairs but as soon as you are a couple of steps down it starts. The stairs are carpeted as...

I have got a very strange draught and for the life of me I cant figure out the source. I would appreciate some help on this one. Lately i have been going round the whole house with sealants and foam filling the cracks and draught proofing the house but this one I cant figure out. It is on...

Cant get onto the website from the link. It says 403 forbidden. Could you please resend the link. EDIT: Never mind here is the correct link http://www.diyfaq.org.uk/plumbing/controls/midpositionvalve.htm

Thanks Mandate, were you going to attach a diagram or otherwise which diagram are you referring to? As far as micro switches are concerned, when i opened the valve i did note that there seemed to be two but only one at the bottom use to make contact the top one didnt. Is that wrong? I was...

No you are not. It does run all the way upto the loft and all the way down but havent got a clue. Anyway that problem is sorted and i had a laugh. Found the culprit and it is must have switched off when chucking the hoover in there before leaving for work in the morning. About the...

If you are referring to the one which is on the top right then that is the one for immersion element in the water tank. I dont think that has anything to do with the circuit. Is there another fuse anywhere as the fuse box has all the fuses in on position. I got my Mrs to check it :wink: The...

Thanks for the info. I was not feeling well over the weekend so couldnt reply or do the wiring. But i did manage to take the control off and check whether it was set to P on the back which it was. About this diagram which you have sent. I presume this is for the white box which feeds the...

Here are the pictures as requested. I have labeled as extensively as i could. One thing which i wanted to ask was that i managed to buy another set of x800 and an inhibitor. How long should the x800 be left in the system so as to effectively clean the system without running risk of leaks. I did...

Thanks, i will be posting them tonight or tomorrow morning as i am at work. The plumber said that he is not comfortable with electronics so he recomended an electrician. I am very comfortable with electrics so should be easy once i get the diagrams and some tips.