Search results

I apologise in advance if my teminology is not spot on, but I want to connect a new 32mm waste pipe for a new bathroom sink into my existing 40mm shower waste pipe. The location of the new sink would mean I would have to drill through joists to reach the soil pipe, which I want to avoid if...

Thanks for all your help!!

Hi, I currently have a spur coming off a double socket (on a ring main) supplying a 3Amp FCU, from this FCU there is a connection to an 30mAMP RCD FCU which in turn supplies a shower pump (None of this is anywhere near the bathroom by the way). Would it be safe to take add a new spur...

Hi, I ahve had a good look through older posts about installing shower trays and the general opinion is to use silicone or gripfill to secure it in place rather than a sand/cement mix. I have bought a couple of tubes of gripfill. But I placed the tray in the location I want the shower to...

Rotten floorboards and (maybe) the joists underneath would this not be a mammouth problem???????? Perhaps not to some people! I dont know if this would work moby_wan but could you not supply the cistern from your cold water tank in the attic instead of directly off the mains?? Just a thought!

Ok thanks, sounds like its getting out of my depth, I need to get an electrician in to put the new downlights in the bathroom anyway so I think I will get him to install the shower pump and check bonding at the same time!! Is this likely to cost be hundreds of pounds, to install 5 50w...

Not sure what type of circuit I have got, will try and check tonight. I can still add a spur to it if it is a radial circuit though can't I?? None of this is in the bathroom it is all in the airing cuboard and the bedroom! The instruction manual for the pump says "the pump must connected to...

Is it ok to run a spur from an existing single socket and put a 3 amp FCU at the end for the pump for my shower (its not in the bathroom)? Am I right in saying I have to use 2.5mm cable for the spur? Also if it is ok to do this, if I wanted to change this single socket in the future to a...

Hi, Hope someone can help, can anyone explain Amps to me? Or recommend a good website or book that will?? I have asked for advice in my local DIY store but they didnt seem to have much of a clue either!!!!!!!!!!!!! Am I right in thinking the Amp value that comes on everything for example...