Search results

8) Hi thanks for the replies, I did a combination of two suggested things, using string going at right angles to the joists ( at 450mm ) intervals, I could visually see which joists were the highest ( because the string didn't touch them). On the remaining joists, I used a long level at right...

:?: I have pulled down my old ( lath & plaster ) ceiling and exposed the ceiling joists, so I can put a suspended ceiling system up. The suspended ceiling system hangs off the timber joists with timber connectors. The joists are uneven and bow to varying extents in the middle. I need to find the...

:D Denso, Thanks for the comprehensive info, very much appreciated - I will start to wade through this weekend. Thanks again

:) Done that, check out the AIM address in my profile. Thanks very much denso.

Thanks for your response denso. Yes, the Full length of the joists is approx 4m between the inside edges of supporting walls at each end. If I don't double board the ceiling, the load will be about 15Kg/m2, will the joists support this weight OK?. Any idea where I can get a copy of your tables!?

:?: I own a residential property ( circa 1900 ) and have removed the old lath and plaster ceiling in one of the bedrooms on the first floor ( the first of 6 rooms to do). This ceiling is to be replaced with a suspended plasterboard ceiling, suspended off of the old ceiling joists which are 100mm...

:) Cleaned the pressure switch with boiling water, as suggested, and ensured that the outlet was clear of blockages. while machine was out, I took the opportunity to fix the outlet pipe as high as possible ( to avoid syphoning ). Washing like a dream now. Thatnks sleepyhead for your time.

Thanks Sleepyhead for confirmation that four flashes is a drain problem. Water definitely drains out, although not completely- it could be a partial blockage in the outlet hose but I am a little reluctant to disconnect the outlet hose from the drain pump ,as there is a metal strap holding...

:( Hi, I've seen a problem similar to mine posted on this forum but I need a little more info please. My Whirlpool ADG 7540 starts repeatedly beeping at the same time in the wash cycle. The start light flashes 4 times between pauses and the pre-wash symbol is illuminated ( not the 50deg wash I...

My Whirlpool ADG 7540 Integrated dishwasher is not cleaning correctly. It starts OK but at some time in the cycle the pump sounds like it is stalling on and off. When the stalling occurs, the plastic pipes which transport water to the top spray bars become unseated - giving the poor wash...