Search results

Done as you have suggested, and if I unplug the wiring block from the main flow switch the fan goes out. when I short the switch the fan come back on again - does this mean that the switch is working? The 2 small holes in the DV are clean and have taken the DV apart again just to make sure there...

Your assumptions are correct with the boiler. My Tech help guide that came with the boiler calls the switch at the front of the DV a "Group Circulator Consent Pressure Gauge" and consists of A wiring block, Black plastic housing, Spring, White plastic plunger and a rubber diaphram. I took that...

The Model is an ariston euro combi 23(installed 2000). The flow switch is working and slids across when the hot tap is turned on. I can also press this switch manually and the boiler goes throu its start up (fan starts, pump starts, water flows) still no ignition. I've also just noticed that the...

Thanks for the tips, have cleaned the pump and flushed the heat exchanger. The pump is working and I'm confident that the water is flowing freely. Still no Ignition. There is a "if boiler does not light press this button" but that also has no effect. gas is getting to the valve and all fuses are...

Hi, I'm hoping that someone will read this and instantly give me some advise. A couple of weeks ago my ariston combi boiler had a bit of trouble with hot water. The water it pumped out was luke warm and the boiler itself overheated after about 15 seconds and then restarted after it had cooled...