Search results

Tony, Just to give you a final update which is to let you know its working fine.....touch wood. It was dry joint on the back of the Modulator board hence the fizzing sound (arching). If you undo the four screws holding it and lay it down (still connected but electric off) it was the...

Sorry Tony maybe I didn't make it clear. The re-soldering of some of the dry joints refer to problems with the boiler many years ago not recently. Touching certain areas on the board and the boiler would fire up. It was just a light tap which was enough to make contact. Having a closer look...

Tony (or anyone else) Just to update you. Wife showered yesterday and it was fine. I go in, get wet and the bloody thing turns off. It then turns on and off a few times before it eventually stays on. Heating had turned off this morning before the set time on the timer. What I have...

Ok Tony thank you for your advice Vic11

Agile, I think I have

Hi all Intermittant fault in that it will not fire up. It can be working fine the night before but when its due to come on again (on timer or manually) it doesn't. The power light is on and you can hear and see one of the relays click and the fan starts but thats it. The green light doesn't...

There is a red button on the back which I've pressed but from what I've read elsewhere you should hear an audible click or feel it click, it does neither and hasn't made any difference anyway. Vent pipes are clear.

Hi jj4091, thank you for your reply, I was more inclined to think it was the thermostat rather than the element given that it does get hot on the odd occasion but wanted confirmation from someone more knowledgable. Is there any way I can confirm one way or the other? As for the heat...

Hi JohnD, thank you for your reply. Apart from today it takes an excessive amount of time to dry clothes, even a small amount of clothes. This was not the case when it was first bought. Normal load. Plenty of room left in the drum for it to tumble. Sensor drier? Thats the problem...

Hi all, I have the Philips Whirlpool Tumble Dryer AWG 210 / 7WH but most of the time it just gets luke warm. Sometimes it will get hot like it did when new, today being the first time for a while. Would appreciate advice please. Thank you Vic

plugwash & crafty1289 Thank you both for your help and the diagrans, appreciated. Regards Vic

Hi crafty1289 Thanks for the link. securespark No, about 70 feet. You can view the diagram here: http://www.esnips.com/web/switch A text file is also available with some information but if you need to know anything else please ask. Regards Vic

fireman22, breezer & securespark, Thank you for your replys. securespark Ok I can see the funny side of it. I take it you're an electrician. breezer, Thanks. Got you. fireman22 Hi fireman22, thanks for your explanation, appreciated. Have made a diagram but would like it...

Hi Lectrician, thank you for your reply. Maybe I didn't explain it very well so I'll try again. I know I will need 4 core cable for the lights and switches. I don't need sockets (power) as I've already run a power cable to the garage and added the sockets. Lighting in the garage is...

Hi Breezer, thanks for your reply. No batteries in the torch. Not worried about how difficult or costly it will be and I'm quite capable of doing the job. All I'm after is a diagram of how it should be done.

Hi all, I would like to wire up two lights, one at the rear of the house with a 2-way switch and the other outside the garage with a 2-way switch so they both work together. The garage is about 70 feet from the house. There is a junction box in the kitchen roof that can supply the power...