Search results

Just to be sure, the pressure switch is located at the top of the machine, it is round and somewhat flat, like a large hockey puck and it has a clear hose connected to it. I don't have a multimeter to ohm it out to make sure it is working properly. Is the part available to buy individually...

Still doing the same thing. The 2nd and 4th lights are flashing the on/off light flashes very fast

it fills just fine. it has a problem when it comes time to run the rinse and spin during a cycle. You can manually select final spin and it works. It doesn't want to run through a complete cycle.

Hi Sleepyhead Had the pressure switch out and could hear it operating when I manually blew into it. Blew down the pressure line and that was very clear also. Checked the discharge pump as it was making a little noise, it had a safety pin in it. Cleaned it and reassembled it. Cleaned the...

Sleepyhead, Thanks for all of your help. I really do appreciate it!

can the switch be removed and cleaned and reassembled? or is it a sealed unit with a pin hole sized opening that sensed the pressure, possibly with a diaphram and you cant really do much with?

Hi Sleepyhead. The flashing lights are on the left and are the 2nd and 4th.

Hello I have a Hotpoint WF250. During the cycle, the 'on/off' light blinks along with the 'reduce creases' and 'time saver' lights. The water does not drain out of the tub at this time. You can move the cycle manually to the final spin and the tub will drain. So the drain pump does work...