Search results

Thanks Masona, i like the idea of the batten under the cabinets. I have a pelmet on the bottom so it wouldnt be seen. I also have some extra pelmet to match the cabinets so could even use this. I will take a look in B and Q tonight for the fixings and let you know how i get on later in the...

I am currently refitting the kitchen and have to hang some cabinets on a partition wall. I know (roughly) where the studs are but don't think i will be able to fix to them with every cabinet hanger. Can some one recommend so fixing that will take a good deal of weight and not pull out of...

Cant you just lay the rad flat on the floor with the pipes still connected (loosen the valves), or are you unable to lift it off the hangers on the wall?

I took a look on t'internet and found the cooker has been rebranded as the Hotpoint EG600. Take a look here to see if this is the cooker you have (there is a picture) http://uk.pricerunner.com/home-appliances/cookers/157998/details It states 'The voltage depends on whether the cooker uses...

At the moment the cooker is wired directly from the feed coming from the cooker isolation switch and then out of the wall. I presumed this was the 'norm'? should the feed have a socket that the cooker plugs into then? **most confused**

Breezer there is an existing junction box that i would like to break into. Would i be able to simply run 1 mm twin and earth from there to the switch and then onto the light?

Thanks Breezer. I think the easiest option is to replace the cable with 6mm as i have to move the isolation switch anyway and can then run it to the correct length. Also am i able to connect the extraction hood to this supply as well?

I want to add an outside light to my house and the easiest way to do this (I think?) would be to take a spur off the existing socket ring, add a switch and run the cable through the wall to the light outside. Would this work? If so would anyone be able to help me out by forwarding me a...

I currently have an electric cooker (and hob) in my kitchen with a 6mm cable running from the RCD to the cooker isolation switch and then to the cooker. I am replacing the cooker with an electric oven (3.0 kW nominal power, requiring a 13 amp power supply) and gas hob. I need to extend the...