Search results

As part of the Plumbworld bathrrom suite, it was supplied with a Merano Thermostatic Dual Square Bar Mixer Shower. Pretty rubbish to be honest but it serves a purpose. Anyway the thermostat has given up the ghost - poor flow or running cold. Ive taken the adjusting handle off and played aound...

It's on the ground floor (concrete flooring) and the waste is via a 90 degree easi fit WC pan connector down to the floor and the drain below that. The 'so called' plumber siliconed the base of the toilet to the tiles and has left a gap between the tank and the wall of around 7cm.

A few weeks ago I posted on here about my tale of woe regarding a plumber I trusted, took my money and did a runner not finishing the job, namely reconnecting a new radiator. Thank you for everyone advice. Anyway he has appeared to have left me with another issue - poor or none existent...

My plumber seems to have gone AWOL after fitting a toilet, basin and wall mounting a new radiator. Thing is he hasn't completed it (see pictures). Is there an easy way for a DIY enthusiast but no expert to reconnect it?

Thanks all for your help. The ESRTP4+ was N/O + COM wired only (not OpenTherm) so I went for a Nest E. Did look at the Tado option as we have that at our main address but thought the Nest E looked better for the wife who struggles with technology (or to be more exact, cant be bothered with it)...

Thank you for your prompt response CBW. I am not at the property until Thursday. Will check the actual wall mounted thermostat for connections (should have done that I know). The product information on the ESRTP4+ does mention OpenTherm communication

I have a Morco Series III GB24 combi boiler connected to a ESI ESRTP4+ thermostat. What I would like is a thermostat that I can access remotely i.e. through the internet, so I can control the temperature from afar. Looking inside the boiler there are two wires (blue/brown and labelled room...

Many thanks for your very comrehensive and understandable response. It is appreciated. So to confirm if I went with Hive for example (purely to program hot water and central heating - no replacement of TRV heads) my current hard wired Tado wall mounted smart thermometer becomes redundat (I...

Ive had Tado installed for quite a while now but for the past few months it has been proving rather problematic by randomly coming on and not going off etc. Anyway my configuration is a Tado smart thermostat which is hard wired and replaced the old manual thermostat in my hallway. I also have...