Search results

  1. M

    Heating but no hotwater, and yes I have searched the forum!

    Just a little update on this old thread, problem now solved! I decided to cut the return pipe from the HW cylinder so I could plug a hose pipe on that particular section to flush it through - on cutting the pipe I found it to be completely blocked with sludge - thus not letting any hot water...
  2. M

    Heating but no hotwater, and yes I have searched the forum!

    Thanks guys, I now know it is air in the system, it was just a coincedence that the air started from the gate valve making it seem like the gate valve was at fault by not passing the hot water through. I have tried bleeding all the radiators and the bleed valve near the gate valve on the...
  3. M

    Heating but no hotwater, and yes I have searched the forum!

    Thank guys, I will try you suggestions on the weekend and let you knwo how I get on!
  4. M

    Heating but no hotwater, and yes I have searched the forum!

    Expansion tank is full of water and ballcock working, just went up there and checked. Can I just confirm that if the valve was working properly it should let the hot water pass and go into the hot water tank? If so then I guess the valve is still faulty and it either was not fitted...
  5. M

    Heating but no hotwater, and yes I have searched the forum!

    What does the manual arm at the bottom of the valve do, is this supposed to manualy open the valve? I tried moving it but there is no resistance in it and it does not seem to make any difference.
  6. M

    Heating but no hotwater, and yes I have searched the forum!

    The valve is a honeywell V4043H1056 and is brand new, I have looked the part number up on the internet and it is a 22mm 2 port zone valve 240V. It was fitted by a plumber just before we moved in as he apparently thought the valve was the problem and had assumed everything was working. The...
  7. M

    Heating but no hotwater, and yes I have searched the forum!

    I checked the thermostat on the cylinder - it was set too low for the boiler to come on, the boiler now switches on fine so it's not the timer. There is a valve next to the hot water tank that has recently been replaced, I can hear this opening and closing but it does not seem to pass any...
  8. M

    Heating but no hotwater, and yes I have searched the forum!

    I know this must be a common problem but I searched the forum and could not find someone with the same issues! I have recently moved into a new house and the hot water has not worked since moving in, it will only work if I put the immersion heater on, the CH works fine. I had a little...
Back
Top