Search results

I did some searches here and the question appears to be quite a can of worms! :LOL: I have a Valliant 282e which has a secondary heat exchanger which is clogging up on a regular basis. I do flush and put in inhibitor in every year - but regardless, this is happening. I think I need a filter...

What is the digi-lan option? Similar to GPRS? But Ethernet based? Has anyone used the HomeControl+ units? Are they GPRS? Docs on these units are hard to come by!

It is certainly trivial enough to do.

Only the obvious CCTV cameras you can see :whistle:(y)

Have you interfaced the X10 to the Enforcer? What kind of home automation options are available from the Enforcer? Do you think it uses data when not in use?

Bit of Google-Fu found an old Pyronix roadmap that have a DIGI-GPRS, DIGI-LAN, and DIGI-WIFI modules. Well these were on the roadmap for release November 2014 :) So I presume they are still coming. It also speaks of a home automation module, and Video Cloud storage.

I'm not hung up on the camera stuff - though if it can be added to existing system in the future - fantastic! Same with home automation. A nice to have, and I can wait if it is just a software update, or buying some extra bits (i'm hoping they will use some sort of industry standard like X10)...

I'm curious to know how about the Pyronix Enforcer HomeControl+ Panel if you would like to post an update. Information on the tecnicalities of it seem very very slim on the ground. I did find a Russian site which mentioned integration of CCTV to this system - but nowhere else. One thing i'd...

I take it your alarm is not monitored. Has it gone off while you were away - and if so what did you do? Does it continue to sound forever until someone switches it off? Could be annoying!

I don't know - hence why i'm asking someone with 20/20 hindsight :)

Might have going the Texecom route been better? Would it support remote disarm/arm?

Sorry to drag up an old thread, but my needs are the same. What did you go for in the end and how did it work out? Did you have to buy any extra bits for the GSM integration and is it reliable?

This for the response. I did watch it drain and fill a few times and it looked ok. My initial problem was dishes and glasses which were not entirely clean. I cleaned up some muck in the spray arms and set a few 70 degree washes to clear up any fatty deposits - so lets see what happens.

I am having a similar problem here. I believe it is the fill chamber / matrix which is the issue. The blockage seems to be on the left of the image (a close-up provided too). I've been watching it drain on a cycle, and i'm wondering what that area actually does - or if it has any effect at...

This is on a closed system for the CH water. I notice that the pressure goes way low - almost to zero. When the CH comes on, it goes way up again - to just above 2 (which I suspect is my mains water pressure). I thought there could be a leak in the CH - and even bought some Fernox F4...

It does not seem to be replaceable. Perhaps I could glue something onto the existing one - but i'm unsure how long that would last. I'd prefer to find the manufacturer and get a new one.

Anyone seen this before? The screw thread you see there screws into the waste in the bath. You then press it up and down to open/close it. Pictures 2/3 show it in the extended and non-extended state.

Got this about 5 years ago - went to the shop I bought it from - now under new mangement - and they don't know who makes this and can't obtain a spare. Anyone know where I can get a spare? The seal seems to have perished, and is slowly leaking water. I really don't fancy replacing the...

Right, I did an X800 treatment on my system and it seems to have solved the problem. In fact, i've never had hotter water come out of this boiler! The boiler has been in place for about 10 years now and it has mostly had inhibitor in it, but perhaps I didn't flush and replace it _every_...

Hi, I am in Hertfordshire. I'll take a look at it and make sure I get the right one, though i'm surprised that they would sell two incompatible parts with the same part number.