Search results

ok, what would be the max power consumtion to allow it to be plugged into the ring main, 3kw ish??? I thought/ have been told that the oven i have bought could just plug into the ring main but a lot of sites i`ve read on net seem to show it connected into a seperate feed. I`m kind of assuming...

I am aware of notifiable works & Part P etc but a question i have is can an electric single oven (seperate from the HOB) be plugged straight into a ring main socket. Cheers in advance

thanks mate for the advice, i will give your final instruction a go. One final question, what would be the effect of swapping the top thermostat (current working one) with the bottom one temporarily, would this give me any hot water at all until I get hold of the new Rod Thermostat, or does it...

hi again i think it could possibly be the lower thermostat that is faulty. I took the plastic cover off the bottom immersion heater to locate the thermostat. I measured 240 accross the live neutral (the live terminal on the input of the thermistor) with zero volts on the output - feeding the...

sorry mate your right I didnt say that before. Heres the situation the type of unit is a pulsacoil 2000 (it dosnt mention anywhere about it being A class or anything. There is a switch on the wall nearly which gives you the option of a half hour/1 hour or 2 hour boost. when i preseed the...

hello just to update. As i said before both the off peak and on peak immersion heaters were cold. I pressed the booster button for half an hour. The upper immersion heater then heated up and i then got hot water through the hot taps. the lower immersion heater although not freezing cold is just...

Hi Softus, thanks for the instructions. The Brass boss of the upper immersion heater is cold, so as you say its not being heated. Any ideas ?

Hello all Just found this site so thought i would seek some advice. I have a pulsacoil 2000 which was installed 2004 (new apartment). This feeds the hot water for sinks and bath only (not shower). Basically in the past 3 years this will be the 3rd time it has went faulty - no hot water. First...