Search results

Hi my beco 8650w dishwasher is stuck on the last minute of the programe and keeps cutting out/losing power, then comes back to life then cuts out again, the timer will not move off the 1 minute mark, any help appreciated thanks in advance

OK people, its still playing up, has anyone got any ideas as to what might be the problem, from the symptons i,ve given, i,m now thinking pcb board, whilst the misss is thinking buy a new one!!!!!! Somebody help me please.

Ok gUys had a look through similar posts, had the dishwasher on the tilt as explained in other posts, laid it on its side took off the bottom panel to have a look at the pump. Pump looks in good order, impellar turning with the notchiness of the magnets (hope you get what i mean). Had a good...

Hi Guys, my Beko dishwasher has almost stopped working, it started to make a buzzing noise from arond the area of the programme select knob part way through a wash cycle (anyone), now it starts to power down during a cycle and then back on, it does sound abit weazy when it powers down (think...

12kw boiler running 10 radiators so not alot of room for error, gas flow rate worked out to be pulling 47.5 into the boiler so wellwithin requirements, now looking at the timing controller that might be at fault, ie turning off the boiler before the water is up to temp, so now running hot water...

tonyboy, for a two minute reading on gas flow rate, just double last figures, 00730,72.0 start 00730,74.2 one minute 00730,77.0 two minutes The meter was spinning round contsantly, whilst I was outside on my knees with a torch in the rain last night taking the reading and I was out...

ok guys here goes, shower uses 12 ltrs a minute (it took 5 secs to fill a litre jug), as for gas flow rate, meter reading- 00730,72.0 after one minute with boiler heating water and central heating meter reading- 00730,74.2 doesnt really mean alot to me as to how much its using, hope...

Yep house was new when moved in, and covered by NHBC, Have been getting onto Barratts all the time, they themselves are quite helpful, the system was fitted by contractors employed by Barratts, they have been back several times but to no avail, everybody seems to be blaming each other for the...

Hi there first post and new to forum so please bear with me, I moved into a Barratts new build last October and since then have had problems with both heating and hot water but mainly hot water. My system comprises of, Ideal Icos boiler (HE Range) Drayton Lifestyle dual channel programmer...