chipboard flooring

We need to repair a couple of holes in chipboard flooring which is laid on engineered i-joists. Do you have any advice on how to support the square edges of the new chipboard pieces given the nature of i-joists? Unfortunately it is unclear to us how to attach support/noggins to these joists...

Hello I am currently laying down my T&G chipboard flooring. Just wanted to know how I would go about continue the flooring into the next room… see plan below… I have to do all rooms. Once I reach door of one room, do I continue the tongue groove into the next room ? Or just start again in next...

heyo I'm going to be replacing the floor of an upstairs bedroom pretty soon, the floorboards are pretty deteriorated, cracks and holes and completely uneven from various single and half boards being replaced over the years, just generally in good need of replacing and the carpet is getting done...

Hi all, Long time lurker, but I've generally been able to find everything I need already mentioned somewhere else...until now! I'm currently boarding out a small area in my loft around the hatch, and plan to do this straight on top of the joists. (The remaining area already has a raised floor...

I am repairing a bathroom floor which has crumbling chipboard. 20160212_160526 by Adrian Smith posted 12 Feb 2016 at 4:11 PM I've discovered that under the 22mm chipboard is some kind of plasterboard (18mm) with a small amount of fibreglass wool under that and then more chipboard underneath...