#draytonwiser

Hi all, recently replaced all of our normal trvs to smart trvs, except one radiator to allow it to always flow if the others shut off. I am experiencing an issue on all radiators when one of the TRVs hits temp and closes the valve, there is a tapping noise on the exit pipe of that specific...

I need to connect a drayton wiser controller to a boiler Potterton Gold Combi 24 HE A. Can you please advise on the wiring scheme? Please see the wiring picture of the Potterton Gold Combi 24 HE A

Hello, I am trying to replace a Danfoss system with the Drayton Wiser 3 zone setup. The house currently has a gas boiler controlled by Danfoss TP9000MA which controls the heating downstairs and hot water. This box has an external temperature sensor on the wall which is wired back to the unit...

could someone advise me what my fitter connected wrong, that the HW is faultless, but the heating does not activate in any way. neither with the knob on the boiler nor with the thermostat. I already hosted three engineers who couldn't get it to work properly.. my boiler is baxi 800 and the...

Hi everyone, hoping there are some knowledgeable people here who can help me understand what's going on with my Wiser and boiler setup, and hopefully reassure me that it's not causing unnecessary wear and tear on my boiler... Boiler is a Worcester Greenstar 30 CDi Classic Regular ErP and I...

I am aware I am not a gas engineer btw.. So long story short, my boiler is bricked. No display, nothing. Background is that I started fitting a Drayton Wiser Hub and thermostat. While I got it wired in fine the boiler failed to light when the Wiser Hub called for heat. It was getting late and...

Hi, I have recently had Drayton Wiser kit 2. I seem to be able to turn the heater and boiler on from the app but it will not turn off manually from the or through the designated booster time so have to keep turning it off from the mains switchboard. Any help would be much appreciated. Just to...