machine

I have just inherited a Wadkin MG Morticer The plate on the front states that it is single phase but it has 4 wires that are labeled L1 L2 A1 A2. Can this be wired to an MEM switch as I have one spare, and how do I wire it together I have wired 3 phase machinery before but because of the 4...

What do the most recent regs say about washing machines in bathrooms? My (2.5m x 2.1m) ground floor bathroom and 1st floor kitchen need rearranging: obviously, the washing machine really needs to be in the bathroom (below the kitchen). The 2 main trips on the CU are RCD protected. Thank you...

Can I add another fused spur in a bathroom (for a washing machine) to the existing supply for the central heating boiler? Old colours cable - 51M DELTA ENFIELD BASEC. Thank you, Dain

My wash clothes machine isnt working right. At half of the cleaning with more than half water in it, the machine isnt pumping out the water. It would be or the pumping machine or the electronics plaquete. How can I repair it? If its the plaque I dont know how to dissambly to take a look. Any...

1st floor galley kitchen with vinyl flooring. Kitchen is not 'fitted'. I'd like to put some sort of fairly rigid mat under the washing machine to prevent the point loaded washing machine feet from damaging the click vinyl as the machine tries to go walkabout. I read that rubber mats, or...

My kitchen is upstairs so the floor is a mix of t&g chipboard and ply; it doesn't have gaps and I levelled it. Is it a bad idea to put click vinyl flooring in there with a washing machine? B&Q colours slate tile 5mm. Will the washing machine destroy the click? Thanks..

Was not sure what section of this site I should put this, but I have decided here has it is vaguely electrical related (or at least the theory behind it is supposed to be based on) and none the less I thought you would find this amusing. (y) So the other day I was on Facebook and I saw a post...