scribing

Hi, just in the process of fitting some new skirting board to my Victorian terraced property. The walls are slightly out (as to be expected!), and I’ve had to fix new battens below the plaster line to attach the skirting to. I’m having an issue with joining the skirting at one end with a...

Hi can someone please advise on best way to scribe this type of skirting. It is similar to bullnose/pencil round. I have seen videos on how to scribe various profiles but the small curve at the top is so close to the edge I am not sure how this would work? Also I am assuming i don't need to...

Hi all, I've just studded out a frame on the wall (3x2) to hang a piece of MDF onto (with a hole cut out in the middle for a TV bracket). The 12mm MDF will overhang the frame slightly so I can hide LED strip lighting behind. The piece is mainly square (1200mm width x 1650 mm height) but the...

We recently had a loft conversion which meant we had to nick a bit off the box room for the stairs. They’ve rebuilt the stud walls which means that it’s now a couple off feet further into the room.They left the coving insitu and just cut it off at 90 degrees and butt the new wall up to it. This...

Hi all, I have a dilemma whereby my upvc door frame has trim (covering joint in UPVC frame) which comes out by 3mm but is shaped more like the attached picture. I have moulding ready to lay to finish the floor, but can’t work out the best way to scribe or finish the wood up against it. I’ve...