150mm kitchen carcass advice

[needmorstuff]

Hi All,

I dropped a couple of 150mm pullout larder units from my wickes order as they were about £500! even with the 50% + 15% sale.

I did get a couple of 150mm door blanks and was just going to blank off the space. However... I have seen the following 150mm pullout basket and mechanism at screwfix for £30 each! so just need any 150mm carcass that will be compatible with my current wickes kitchen.

http://www.screwfix.com/p/hafele-150mm-pull-out-unit-chrome-plated/74100

not being experienced in these matters.. will any 150mm carcass be ok?

or hygena do the full carcass with pullout mechanism for £55 each
http://www.homebase.co.uk/en/homeba...vDhamKafU0CmC5HEC4xPVTcAUdCExEpsIcaAqGJ8P8HAQ

 

[foxhole]

You could make them very cheaply or http://m.ebay.co.uk/itm/WHITE-FLAT-...%3Ab13411ef1580a6a8f3e86a3dffe79b75%7Ciid%3A2

 

[needmorstuff]

funny I just picked up the same at local b and q for 60 each .. my concern was more about the sizing as I thought wickes have different sizest. . but the fascia I have is wickes so I should be ok

 

[needmorstuff]

bottom of the unit is 50mm higher than wickes but plinth will cover it so all went well. got done at about 22:50 last night.