I have just fitted an automatic draught excluder to the door from my hall to the integral garage. When the door opens the draught excluder rises automatically so that it clears the carpet. It is a Raven RP60 and the seal is working properly at one end but not dropping far enough at the end nearest the door hinges. Can anyone suggest how to remedy this.
Alternatively, does anyone know where you can buy an automatic draught excluder that lowers when it strikes a cam on the door post (latch side). Raven appear to make one (the RP3) but I cannot find any stockists.
Any help appreciated
Alternatively, does anyone know where you can buy an automatic draught excluder that lowers when it strikes a cam on the door post (latch side). Raven appear to make one (the RP3) but I cannot find any stockists.
Any help appreciated