I have a boiler that will not fire up. I have emptied the condensate tank, which had water in it. It then fired up but switched off after 10 secs, with the 30oC/flame failure lamp lit up. I have cleaned the flame failure probe, but it still will not fire up continuously. Any ideas, Peter58
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
baxi combi boiler instant 80 HE problem
- Thread starter peter58
- Start date
I have this idea that by emptying the condensate "tank" ( actually a "trap" ) that you potentially have allowed products of combustion to enter the property.
Then by removing the flame failure electrode you have breached the integrity of the combustion chamber.
The only advice that I can give you is to get a competent registered boiler engineer to check the safety and diagnose the fault.
Tony
Then by removing the flame failure electrode you have breached the integrity of the combustion chamber.
The only advice that I can give you is to get a competent registered boiler engineer to check the safety and diagnose the fault.
Tony
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
