i have a biasi 24s boiler at first it would give you central heating but when you went to run the bath it would blow the fuse in the main switch board then it would cut out if you put a new fuse in it it would start back up again you will then get central heating but again if you run the bath it blows again any one have any ideas what this could be ??????
biasi 24s boiler
- Thread starter leeben
- Start date
Sponsored Links
now both fuses have blown so now we have no water or heating cant understand what this could be....
Sponsored Links
No, I have been out at a fish restaurant with a few friends in Finchley.
This is not a 24S !
Its an M90 or M96.
The diverter valve gland is leaking and the motor actuator is failed.
Both the gland and the actuator need to be changed.
It leaked because the water is dirty and so that should be addressed as well.
Tony
This is not a 24S !
Its an M90 or M96.
The diverter valve gland is leaking and the motor actuator is failed.
Both the gland and the actuator need to be changed.
It leaked because the water is dirty and so that should be addressed as well.
Tony
thanks for that plumbers been and sorted it out and noow were lovely and warm again cheersDIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
